Small Capacity Bitumen Membrane Production Line Automatic production line improvement process
Now in many machinery factory which will use the production line, the use of production lines can greatly improve the efficiency of the production line is now semi-automatic and fully automatic, the general situation below the use of automatic production line more, because the automatic Production line to use relatively semi-automatic will be more convenient, and today we want to introduce the automatic production line to improve the process. Hope that we can seriously read our article.
1, to seize the existing problems, set goals. The existence of the problem need to rely on the data to master, for the experiment can be used for statistical methods. In addition to confirm the results also need to improve the data, the existing problems can be shown in detail. 2, to establish the organization to improve the process. In order to improve the need for a dedicated task force, to rely on staff or to rely on the quality management team in various agencies. 3, to be due to experiment. Make full use of technology and experience, brainstorming, determine the order of analysis, statistical and technical research. According to the need to develop experimental plans to carry out experiments. 4, to develop improvement programs. To carry out a revision of the standard. 5, according to the new standard operation. 6, confirm the improvement results. 7, cited the main reason. 8, to develop improvement plans. Decided to implement matters, responsible person, schedule and so on. 9, to be due to experiment. Make full use of technology and experience, brainstorming, determine the order of analysis, statistical and technical research. According to the need to develop experimental plans to carry out experiments. 10, to develop improvement programs. To carry out a revision of the standard. 11, according to the new standard operation. 12, confirm the improvement of the results.
The whole process is the case, under normal circumstances in accordance with this situation to operate there is no big problem, if the operation of the process can encounter problems we can contact us, we will have professional staff for everyone to answer. As a well-known production line manufacturers, our company has been to provide consumers with quality products and services.
Start the motor method: first turn on the power, this time all three lights will be light, that three-phase power has been to the distribution box. At this point you can press the motor to open the blue button, you can start the motor, if not start, you can open the distribution door, look at the first row of the second DZ108 switch, whether it is red long, blue short. If not this blue can be pressed down. After the motor starts, and then open the assembly line switch, and then adjust the potentiometer slowly upward, so that the speed to reach the desired speed. Turn off the watch when the potentiometer slowly down to zero, and then turn off the watch switch, and then press the red button on the motor, you can stop the motor. Finally turn off the main switch.