Basic Info
Model NO.:waterproofing membrane
Type:Waterproof Roll Material
Material:Bitumen
Thickness:Thickness T3mm
Cold Flexibility:-30
Port:Qing Dao
Heat Resistance:70
Certification:ISO9001:2008,ISO14001:200
Strandrad:GB23441-2009
Specification:GB23441-2009
Origin:China
HS Code:6807100090
Self Adhesive Waterproofing Membrane Bitumen Product Description
Self Adhesive Waterproofing Membrane Bitumen Product Description
Waterproofing membrane bitumen is made by saturating the base in bitumen, or thermoplastic elastomer (such as styrene butadiene), reinforced with polyester or fiberglass, finishing the upward face with fine sands, mineral slates (or grains) or polythene membrane etc. It has the outstanding performance such as: Convenient to apply, no environmental pollution etc. This product is consisting of two kinds: Without reinforcement and polyester reinforcement.
Self Adhesive Waterproofing Membrane Bitumen Specification
Width: 1m
Thickness: 1.2mm, 1.5mm, 2.0mm, 3.0mm, 4.0mm
Main material: SBS/bitumen
Usage : Walls/bathroom /tunnel/basement/bridge/road
Application method : Cold sticking
Our Services
1. Free sample can be provided to test.
2. Powerful construction technical support.
3. Welcome to visit the factory at any time.
4. We will provide you the best quality.
| Self adhesive waterproofing membrane(PY)standard:[GB23441-2009] | |||||
| No. | Item | Index | |||
| I | II | ||||
| 1 |
Soluble content /(g/m2≥) | 2.0mm | 1300 | - | |
| 3.0mm | 2100 | ||||
| 4.0mm | 2900 | ||||
| 2 |
Tensile Property |
Tension/ (N/50MM) | 2.0mm | 350 | - |
| 3.0mm | 450 | 600 | |||
| 4.0mm | 450 | 800 | |||
|
Maximum tensile elongation%≥ | 30 | 40 | |||
| 3 | Heat Resistance | 70°C no replacement, no flowing, no dripping | |||
| 4 |
Low temperature flexibility/°C | -20 | -30 | ||
| No cracking | |||||
| 5 | Impermeability |
0.3MPA,120min waterproof | |||
| 6 |
Peeling strength/(N/MN) | Membrane/Membrane | 1.0 | ||
| Membrane/Al Sheet | 1.5 | ||||
