Home > News > Content

Self Adhesive Aluminum Bitumen Sealing Roofing Tape

May 13, 2017

Self Adhesive Aluminum Bitumen Sealing Roofing Tape Product Detail

Basic Info

  • Type:Roofing and Waterproofing

  • Ceiling Tile Shape:Roll

  • Material:Aluminum,Bitumen

  • Thickness:1.0mm-4.0mm

  • Function:Waterproof

  • Certification:ISO, MSDS, CE

  • Color:White

  • Usage:Indoor

  • Specification:CE, SONCAP

  • Origin:Weifang, China

  • HS Code:68071000

Self Adhesive Aluminum Bitumen Sealing Roofing Tape Product Description

Self Adhesive Aluminum Bitumen Sealing Roofing Tape DESCRIPTION

A self - adhesive sealing tape recommended for all substrate seling repairs on asphalt, bituminous sheets, glass, metal, plastics, timber, mortar, concrete, bricks, rooftiles, stone. Seal guttering, downpipes, roof sheets or flashings. Seal cracked brickwork, concrete, tiles or glass. Seal carport or verandah rollf to main wall. Seal window frames.


Available in rolls

50 mm x 10m
75 mm x 10m
100 mm x 10m
150 mm x 10m
200 mm x 10m
225 mm x 10m
250 mm x 10m
300 mm x 10m

Also 2.5 m, 3.0 m, 5.0 m, 1 0m, 20 m length is availbale


* Replacement or repair of flashing
* Guttering, down pipes, skylights
* Extensions, porches, window frames
& chimneys, jointing for artificial grass
* Caravans & Conservatories
* Sealing parapets, valley gutters
* Seals capping bolts & roof ridges
* Roof repair of portable buildings


Composite laminate of:

An aluminum foil carrier
A self adhesive bitumen modified compound and,
A silicone coated release interleave. (removed during application)

Thickness 1.0mm, 1.2mm, 1.4mm, 1.5mm, 2.0mm
Temperature range -20 degree / 90 degree
Application Temperature 5 degree
Shelflife maximum 2 years

Application guidance

Ensure that the surface is dry and free from dust, rust and loose materials.

Prime porous surface e. G. Concrete and brick with a bitumen primer or black, bitumen paint, thinned with white spirit, which is allowed to dry.

Cut the flashing tape to the required length.

Peel back 5cm (approx) of the release backing paper and position carefully. Continue removing the backing paper whilst firmly placing the tape to avoid unnecessary creasing.

Smooth down so that the overall contact is complete, and ensure that all air bubbles are removed. Take care not to damage the surface of the tape.

Where tape is joined, ensure that there is an overlap of at least 1inch or 2.5cm.

After use release pack and store upright in cool and dry conditions.

Self Adhesive Aluminum Bitumen Sealing Roofing Tape.jpg