Type:Roofing and Waterproofing
Ceiling Tile Shape:Roll
Surface Treatment:Roll Coated
Certification:ISO, MSDS, CE
(manufacturer) Aluminum Self Adhesive Bitumen Tape Product Description
Self adhesive bitumen flashing tape is a self-adhesive, aluminum or high density polyethylene surfaced bitumen & SBS rubber backed sealing strip. It is a quick, efficient and cost effective method of flashing, sealing and repair that produces a lasting protection in all climates.
(manufacturer) Aluminum Self Adhesive Bitumen Tape FEATURES
Provides an instant seal
Easily applied by hand pressure only
Safe application, no pollution
Available in wide range of widths, thickness, colors
Replacement or repair of flashing
Guttering, down pipes, skylights
Extensions, porches, window frames
Caravans & Conservatories
Sealing parapets, valley gutters
Seals capping bolts & roof ridges
Roof repair of portable buildings
The application temperature should be between 5 degree to 45 degree. The installation procedures are to be as follows:
1. Unroll only the required length and cut the pieces to the desired shapes and size.
2. Place the pieces of membrane on the area to be covered and check whether they match will the profile of the marked substrate.
3. Peel off the release film and carefully place the membrane so as to ensure a minimum of 50mm overlap and then smoothen the membrane from the centre to the edges in order to dive out entrapped air
Available in 50 mm, 75 mm, 100 mm, 150 mm, 200 mm, 225 mm, 250 mm, 300 mm rolls of
2.5 m, 3.0 m, 5.0 m, 1 0m, 20 m length
Special sizes made to order
Store under cover, our of direct sunlight and protect from extreme temperature. In tropical climates the product must be stored in an air-condition environment. Shelf life is up to 12 months when stored as per recommended storage condition.