Fiberglass Infusion Mat 4 Layers Sandwich Mat Basic Info
Model NO.: 1380gsm
Technique: Needle Mat
Fiberglass Type: E-Glass
4 Layers: 2 Layers Roving, Core Is PP, One Is CS
Suitable Process: Rtm or Influsion
Fiberglass Mats Transport Package: Carton and Pallet
Fiberglass Mats Mat Type: Stitch Bonding Mat
Core Materials: PP or Nylon
Process: Close Mould
Fiberglass Mats Specification: LT600/P180/M600
HS Code: 70193100
Fiberglass Infusion Mat 4 Layers Sandwich Mat Product Description
High Strength Fiberglass sandwich Mat for Cooling Tower is a 1380g/m2 stitch bonded composite reinforcement fabric containing a PP layer inside the fabric, the fabric consists of 4 layers: Direct roving in 0 degree and 90 degree directions, a PP non-woven layer in the middle, and chopped strands on the outside of the PP layer.
Applications/Markets: Marine, Transportation, Industrial Goods, Windmill. Cooling tower
The weight of PP or Nylon core is 180GSM and 250GSM.
Fiberglass Infusion Mat 4 Layers Sandwich Mat Properties:
No binder,no warp and weft direction corssing,no ruffled.
No displacement deformation.Good resistance to erosion,fast wet out.
Fast resin transfer speed,good manufacturability,good workability.
Good physical and chemical properties,and easy design to solution.
Fiberglass Infusion Mat 4 Layers Sandwich Mat Packing & Storage:
Each roll covering by polyethylene plastic bag,then placed into carton and set on pallet,or set on pallet directly.
The pallet shall no be higher than 2 layers.
Product shall be placed under dryness condition and shall no be open the covering membrane until applying.
Fiberglass Infusion Mat 4 Layers Sandwich Mat Technical Data:
|2.2||Nominal area weight||g/m2||300 ±5%||300 ±5%||180 ±5%(177)||600 ±5%(602)||10|
|2.3||Roving/yarn weight||tex||1200 ±60 (1230)||1200 ±60|
|2.5||Av. filament diameter||mm||17(17)||17(17)||-||13(13)||Polyester(textured)|
|2.6||Roving type||-||Direct roving|
|2.7||Resin compatibility||UP, VE||UP, VE||UP, VE|
|2.8||Stitching type||Tricot, chain|
|2.9||Space between needles||Gauge 7|
|Mainly Customer & Marketing||Europe,Asia,America,Middle East|
|Mainly Product||Fiberglass chopped strand mat (powder and emulsion), stitch mat, combo mat, uni-direction and biaxial fabric, RTM core mat, woven roving, special products like Ar-glass roving, chopped strand, thin fiberglass fabric, SMC(sheet molding compound), fiberglass/polyester geogrid and geocomposite. fiberglass mica fabric for insulation.|
|Sales Team||15(University Graduates)||Product Team||150|
|Research & Development Team||12||QC Team||8|
|Certificate||ISO 9001 ,ISO 14001 ,SGS|
Give us a chance, and we' ll return you with satisfaction.